Rod holder set with foot plate, open, 2 pieces, black
Round foot plate for hanging tubes / rods. Excellent for use as a rod holder for clothes rods, exhibition stand construction, pull-up bar, etc. Rod can be subsequently inserted or removed.
Set of 2 foot plates, mirrored.
This tube connector is painted black. The paint penetrates deep into the material, is not UV resistant and therefore not suitable for outdoor use.
- for steel pipes with 1" (Ø 33.7 mm) outer diameter
- set of 2 connectors (right / left)
- dimensions: Ø84 x 36 mm
- 3 holes: Ø6 mm
- material: malleable cast iron
- surface: hot-dip galvanized, painted black
- screw: stainless steel
- dimensions screw: 1/4" x 12.5 mm (BSP)
- tool: hexagon socket 1/4"
- weight: approx. 0.31 kg / piece
Important notes:
Pipe connectors and pipe clamps are designed for steel pipes. They are not suitable for stainless steel and aluminum pipes.
The inch dimensions of the pipe diameters (outside diameter) are not the same as the inch (25.4 mm).
In the past, the dimensions referred to the inner diameter of the tubes and the outer diameters were correspondingly larger (at 1 inch, about 33 mm). Over the decades, new manufacturing processes and better steel grades have made it possible to produce thinner-walled tubes. Since tools (taps, etc.) and accessories were already available for the "old", larger outside diameters, the outside diameter was retained and the inside diameter of the tubes expanded.
That is why "inch" pipe dimensions are defined metrically today. Please inform yourself before buying which clamp / pipe connector fits you.
Please refer to the following table:
Pipe size in inch = outside diameter in mm
- Pipe 1/2" = Ø 21,3 mm
- Pipe 3/4" = Ø 26,9 mm
- Pipe 1" = Ø 33,7 mm
- Pipe 1 1/4" = Ø 42,4 mm
- Pipe 1 1/2" = Ø 48,3 mm
- Pipe 2" = Ø 60,3 mm
- Pipe 2 1/2" = Ø 76,1 mm
- Pipe 3" = Ø 88,9 mm
