AVERDE Pipe Connector Adjustable Angle Joint 3/4" (26,9 mm), piece (2 pieces necessary) Adjustable Angle
Joint 3/4" (2 pieces necessary); this adjustable pipe connector is usually used in pairs to form variable angles between 45° - 210°. A single application like AV101-1 is also possible. The indicated price is for one half.
The picture shows the use of two angle joints!
Dimension A: 27 mm
Dimension B: 27 mm
Dimension C: 37 mm
Dimension D: 20 mm
Dimension E: 32 mm
Dimension F: 71 mm
Dimension G: 39 mm
Tube Ø: 26.9 mm
Tube Ø in inches: 3/4"
Weight: 0.24 kg
steel Material: malleable
iron Surface: hot-dip galvanized
Tool: Allen 3/8" (6.5 mm)
Pipe connectors and pipe clamps are designed for steel pipes. They are not suitable for stainless steel and aluminium pipes.
The inch specifications of the pipe diameters (outside diameter) are not to be equated with the inch (25.4 mm).
Previously, the dimensions referred to the inner diameter of the pipes and the outer diameters were correspondingly larger (approx. 33 mm for 1 inch). Over the decades, new production processes and better steel qualities made it possible to produce thinner-walled tubes. As tools (taps, etc.) and accessories were already available for the "old", larger outside diameters, the outside diameter was retained and the inside diameter of the tubes was increased.
Therefore, "inch" tube dimensions are now defined metrically. Please inform yourself before buying which clamp / pipe connector fits your needs.
Please refer to the following table: Tube
size in inch = outside diameter in mm
Tube 1/2" = Ø 21.3 mm
Tube 3/4" = Ø 26.9 mm
Tube 1" = Ø 33.7 mm
Tube 1 1/4" = Ø 42.4 mm
Tube 1 1/2" = Ø 48.3 mm
Tube 2" = Ø 60.3 mm
Tube 2 1/2" = Ø 76.1 mm
Tube 3" = Ø 88.9 mm